Home |About Us | Contact Us |Order Online| Warranty |Shipping | Returns | Privacy | Webmaster




DSC Home



Don't see what you are looking for?

Network Communications Modules

T-Link

 


T
he T-Link TCP/IP transmitter is compatible with the Power864 and MAXSYS control panels. It works within a proprietary LAN/WAN (intranet) to communicate alarm signals efficiently and economically to a SG-DRL-IP central station receiver line card, or to a PC utilizing the SG-Reporter IP ™software. The T-Link connection is fully supervised when used in conjunction with the SG-DRL-IP receiver line card. Any tampering or network trouble will be detected. This allows the administrator to respond to the situation instantly. With the use of DSC’s DLS™-3SA downloading software, site administrators can request information from the panel, change user information, generate status reports and gather daily maintenance details (schedules, arm/disarm information) from a PC via the TCP/IP network.


T-Link STARTER KIT


 


T-Link
Network Communicator Starter Kit
 Includes:

  • T-Link Network Alarm Communicator

  • SG-Reporter IP Software CD

  • DLS-3 SA System Administrator Software CD

  • DLS2002 Software CD

  • T-Link and Panel Service Pack CD

  • CAT5 network cable

  • PC-Link cable

  • Manual set

                            ITEM DISCONTINUED - USE TL-250

Order # T-Link STARTER KIT   $499.95  


T-Link



T-Link
Network Alarm Communicator

  • Allows alarm event to be transmitted over a proprietary LAN/WAN

  • Compatible with DSC Power864 and MAXSYS®

  • Fully programmable with DLS2002 and DLS-3SA System Administrator software

  • UL (AA) and ULC (Level 3) requires communication to a Sur-Gard SG-DRL-IP receiver line card

Order # T-Link     $202.00   



     
    TL150 Residential IP Alarm Communicator 

    The alarm communicator works on existing home networks to create a fully supervised security solution between the household and the central monitoring station, eliminating the need for a dedicated phone line or cellular backup. In addition, there are no long-distance or toll charges when routing alarm communications via the Internet

    Homeowners are able to arm/disarm their security system and view the status of individual zones through a Web page on their home network. The grid provides additional information that is not available from any DSC keypad. At a glance, homeowners can see how recently a zone was triggered

    Order # TL150     $169.95   


TL250



T-Link TL250

  • Allows alarm event to be transmitted over the internet

  • Compatible with the DSC Power 864 and Maxsys

  • Fully programmable with DLS 2002 and DLS-3SA System Administrator Software

  • Uses 128 bit AES encryption

  • UL(AA) and ULC(Level 5) requires communication to a Sur-Gard System III receiver with a DRL3 IP line card

Order # TL250     $279.95   


DSC Image

 


      T-Link TL250D Communicator - connect to existing Sur-Gard and DSC DVACS controls

    • Allows DVACS information to be converted to IP and transmitted over the internet

    • Uses 128 bit AES encryption

    • ULC Level (4 and 5)

    • Requires communication to a Sur-Gard System III receiver with a DRL3 IP line card

    Order # TL250D    


TL-300



  TL300 Universal IP Alarm Communicator

    Capable of communicating with any control panel (including third party manufacturers) that uses the Contact ID format, the simple-to-install TL300 saves end-users money by taking advantage of their existing IP networks and security equipment to create fully supervised security solutions between protected premises and central monitoring stations.

  • 2-way, always-on IP communication

  • 128-bit AES encryption (NIST approved)

  • Supports DHCP (dynamic IP addresses)

  • Low network bandwidth requirements

  • 4 on-board programmable zone inputs (expandable to 12 using PC5108 zone expander module)

  • Programmable through the panel keypad or T-Link Console software (Software Not Included)

Order # TL300     $369.95   


PC5400


PC5400 Printer Interface Module

  • Can be used to support Serial printer
    DVACS communication (Canada only)
  • Compatible with all PowerSeries control panels

Order # PC5400    $109.95 




 

 

DLS-2002 DOWNLOADING SOFTWARE

  • No item code required provided free to customers
  • Program and control MAXSYS functions from a PC
  • Multi-site management capability via MD-12 modem
  • Provides local direct access for administration of user cards and codes, schedules, and allows for viewing and printing of system events
  • Can be used on ALL DSC panels Power Series-MAXSYS  And The New Series (PC1616NNK-PC1832NK-PC1864NK)

    Order # DLS-2002  

SG-REPORTER IP


SG-REPORTER IP

Software for use with T-Link Network Communicator

  • Monitor up to 255 T-Link accounts over a proprietary LAN/WAN

  • Compatible with Windows™ 9x/NT™/2000 operating systems TCP/IP communication and IP management software

  • Searchable database, detailed customer profiles

  • All events are color-coded for easy visual identification

Order # SG-REPORTERIP    $319.95  


 

Home |About Us | Contact Us |Order Online| Warranty |Shipping | Returns |Privacy | Webmaster

©2007 AlarmSuperStore.com