|
Sensors Below Require One of The Analyzers Above |
|
Order # |
Description |
Price |
|
SD1/WH |
Flush mounted shock sensor - N/C
Contacts. Requires analyzer. Mounts in 1/2" hole. |
$28.95 |
|
SD1/BR |
Flush mounted shock sensor - N/C
Contacts. Requires analyzer. Mounts in 1/2" hole. |
$28.95 |
|
SD2/WH |
Surface mounted shock
sensor. (2 terminal) Can be mounted horizontal or vertical N/C Contacts.
Requires analyzer. |
$32.95 |
|
SD2/BR |
Surface mounted shock sensor. (2
terminal) Can be mounted horizontal or vertical N/C Contacts. Requires
analyzer. |
$32.95 |
|
SD3/WH |
Surface mounted shock sensor. (4
terminal) Can be mounted horizontal or vertical N/C Contacts. Requires
analyzer. |
$36.95 |
|
SD3/BR |
Surface mounted shock sensor. (4
terminal) Can be mounted horizontal or vertical N/C Contacts. Requires
analyzer. |
$36.95 |
|
SD4/WH |
Surface mounted shock sensor. (4
terminal w/ mag. contact) Can be mounted horizontal or vertical N/C
Contacts. Requires analyzer |
$39.95 |
|
SD4/BR |
Surface mounted shock sensor. (4
terminal w/ mag. contact) Can be mounted horizontal or vertical N/C
Contacts. Requires analyzer |
$39.95 |
|
|
SS-102 - DSC
|
SS-102 - DSC
The SS-102 electronic shock sensor by DSC have been
designed utilizing the most advanced microchip technology to provide
reliability effective false alarm resistant protection. The Shockgard
series offers a wide range of facilities including remote LED reset, first
to latch indication and subsequent to alarm latch information. Other
features include automatic relay reset and dual stage sensitivity
adjustment by selection offering a broad band of sensitivity control.
Selectable dual count and dual color led information provides the
installer with flexibility he or she requires for this type of detector.
Alarm output is provided by non-latching, normally closed relay contacts,
opening for a minimum of 1 second on a detection of an alarm. The relay is
normally energize to give fail safe operation in a event of a power lost.
Indication is provided by a LED situated on a front cover. On board
circuitry allows for the selection of momentary or latching indication. An
automatic LED inhibit features is also included. Latch enable and reset
may be remotely controlled by standard control panel signals. The unit is
fully protected from tampering with by a N.C. switch operated by removal
of cover. Moisture repelling rubber grommets are provided with the
shockgard.
Order #
SS-102-DSC
$49.95
|
|
| Order
# GRI SG-1 |
Glass Guard
GB-551 On The Glass Shock Sensor |
 |
$37.95
|
|
|
