Waterbug 350 - Battery Power w/OC output

Download PDF

Typical Applications:

• Residential Homes
• Basement Sump Pumps
• Commercial Buildings
• Office and Computer Area
• Greenhouses & Animal Buildings
• All Drain Areas
• Sprinkler Systems

Electronic water and moisture detection at its best!

The model WB-350 operates on a 9-volt transistor battery (Not included) has an open collector output that can be connected to alarm panels, bells, dialers, etc. As many as six sensor probes can be run up to 100 feet away. Each sensor probe has two contacts. When a film of water forms a bridge between these contacts, the unit senses this and triggers the alarm output. The sensor will not alarm due to condensation or high humidity. One standard surface sensor is included with the unit.

Features:

• Economical 9-volt battery power for operation, Approx. 1-year life
• No false alarms due to condensation or humidity
• Can monitor up to 6 sensor probes - up to 100 feet away
• Provides (1) form open collector output for alarm
• Easy surface mount installation
• One year parts and labor; subject to conditions of limited warranty.

Accessory Options:

• Standard surface sensor - P/N 1040
• Under carpet sensor - P/N 1041

Specifications:

• Console Size: 5" x 2.44" x 1.25" (12.7 cm x 6.2 cm x 3.18 cm)
• Probe Size (standard P/N #1040): 2" x 3" x 0.88" (5.1 cm x 7.6 cm x 2.2 cm)
• Probe Size (under carpet P/N #1041): 2" x 3" x 0.18" (5.1 cm x 7.6 cm x 0.5 cm)
• Power Requirements (resting state): 9V battery @ 1.8 micro amps
• Power Requirements (alarm condition): 9V battery @ 380 micro amps
• Approximate Battery Life: 1 Year
• Sensitivity: Will not alarm due to high humidity or condensation
• Operating Temperature: Control and Probe 32? to +140? F (0? to +60? C)
• Outputs: Open collector max. to tripline- 30VDC
• Recommended Dist. Between Probes & Console: 1-2 probes: 200ft (61 m) max. Ç 3 or more probes: 100ft (30.5 m) per probe
• Recommended Max. Probes Per Console: 6