|
Home |About Us | Contact Us |Order Online| Warranty |Shipping | Returns | Privacy | Webmaster |
![]()
Don't see what you are looking for?
![]()
![]()
|
Temperature & Humidity Alerts |
|||
|
Order # |
|
Price |
|
| EA200 |
This advanced monitoring and alarm device provides precise monitoring of critical environments by utilizing an on-board temperature sensor or attaching any one of the remote temperature, humidity and water sensing probes. Receive dual zone coverage from simultaneous operation of the local and remote sensors. If either zone being monitored deviates from the preset limits, a relay output sends a signal to an appropriate warning system |
$98.95 |
|
| EA400 |
Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc. |
$274.95 |
|
| M-001-0081 |
- |
SS High Temp Thermistor Probe USE WITH EA200 OR EA400 |
$66.95 |
| M-001-0082 |
- |
SS Low Temp Thermistor Probe USE WITH EA200 OR EA400 |
$49.95 |
| TA-1 |
The economical TA-1 requires no power for operation. Simply set the separately adjustable high and low set points within -30 to +130 deg F (-34 to 54 deg C) range. If the monitored temperature rises above or falls below the set points, a dry contact closure output is provided |
$53.95 |
|
|
TA-2HL |
The economical TA-2HL requires no power for operation. Simply set the separately adjustable high and low set points within -30 to +130 deg F (-34 to 54 deg C) range. If the monitored temperature rises above the high set point, a dry contact closure output is provided. If the monitored temperature falls below the low set point, a second dry contact closure output is provided |
$49.75 |
|
| MTA-1 |
The professional looking MTA-1 requires no power for operation. Simply set the separately adjustable high and low set points within +32 to +100 deg F (0 to 38 deg C) range. If the monitored temperature rises above the high set point, a dry contact closure output is provided. If the monitored temperature falls below the low set point, a second dry contact closure output is provided |
$48.50 |
|
| TA-40 |
The simple low-cost TA-40 requires no power for operation. A mechanically fixed set point provides a dry contact closure output when the monitored temperature falls below the 39 deg F (4 deg C) set point. This contact output is used to active external low current/voltage alarm |
$19.95 |
|
| 2ATHL |
The economical TA-2HL requires no power for operation. Simply set the separately adjustable high and low set points within -30 to +130 deg F (-34 to 54 deg C) range. If the monitored temperature rises above the high set point, a dry contact closure output is provided. If the monitored temperature falls below the low set point, a second dry contact closure output is provided |
||
| Order # |
|
Price |
|
| T8800 | Temperature Sensor, NO Relay Output- ON BOARD SENSOR |
$71.75 |
|
| T8800B | Temperature Sensor, NC Relay Output- ON BOARD SENSOR |
$66.95 |
|
| T8800R | Temperature Sensor, NO Relay Output- WITH REMOTE SENSOR |
$69.95 |
|
| T8800BR | Temperature Sensor, NC Relay Output- WITH REMOTE SENSOR |
$69.95 |
|
| T88R | Replacement Probe |
$29.95 |
|
| 8065 | RTD-12 Power Supply |
$19.95 |
|
| T8000 | 32°F Fixed Temperature Sensor for Notification of a Freeze |
$24.95 |
|
| T8005 | 41°F Fixed Temperature Sensor For Use With Refrigerators, Walk-In Coolers |
$24.95 |
|
| T8050 | 50°F Fixed Temperature Sensor for Use in Second Homes, Cabins, and Unoccupied Buildings |
$24.95 |
|
| T8060 | 140°F Fixed Temperature Sensor For Monitoring High Temperature Requirements |
$24.95 |
|
| ThermStat-3 | ThermStat-3 Programmable Digital Thermal Sensor |
$79.95 |
|
| ThermStat-4 | ThermStat-4 Programmable Digital Thermal Sensor |
$83.95 |
|
| TP-1 | Use with ThermStat-3 Standard Remote Temperature Probe |
$19.95 |
|
| TP-2 | Use with ThermStat-3 Standard Remote Temperature Probe |
$19.95 |
|
| TP-3 | Use with ThermStat-3 Standard Remote Temperature Probe |
$19.95 |
|
| HTP-1 |
Use with ThermStat-3 Stainless Steel Probe can be submersed in a non reactive liquid HIGH TEMPERATURE |
$19.95 |
|
| HTP-2 | Use with ThermStat-3 HIGH TEMPERATURE Remote Temperature Probe |
$19.95 |
|
| HTP-3 | Use with ThermStat-3 HIGH TEMPERATURE Remote Temperature Probe |
$19.95 |
|
| TP-101 | Use with ThermStat-4 Standard Remote Temperature Probe |
$19.95 |
|
| TP-102 | Use with ThermStat-4 Standard Remote Temperature Probe |
$19.95 |
|
| TP-103 | Use with ThermStat-4 Standard Remote Temperature Probe |
$19.95 |
|
| HTP-101 |
Use with ThermStat-4 Stainless Steel Probe can be submersed in a non reactive liquid HIGH TEMPERATURE |
$24.95 |
|
| HTP-102 | Use with ThermStat-4 HIGH TEMPERATURE Remote Temperature Probe |
$24.95 |
|
| HTP-103 | Use with ThermStat-4 HIGH TEMPERATURE Remote Temperature Probe |
$24.95 |
|
| Order # |
|
Price |
|
| H8800 | Humidity Sensor |
$124.95 |
|
| H8800R | Remote Probe for Above |
$129.95 |
|
|
|
|
|
|
![]()
Home |About
Us |
Contact Us
|Order Online| Warranty
|Shipping
|
Returns
|Privacy
|
Webmaster
©2007 AlarmSuperStore.com